Micro Scale
$10.00
Designed to give you even better grip when used with the Half Scale and Half Scale (A5) grips.
- The Micro Scale is mounted to the right side of the pistol grip with 3M removable adhesive. See directions below.
- The Micro Scale can be used as a set of two, with one on the left and one on the right of the pistol grip.
- The Micro Scale can be used with the Pocket Clip to add more grip to your pistol.
- It allows for the use of the lanyard hole in the pistol grip.
Mounting the Micro Scale
- Peel off the film from the adhesive on the back.
- Align the Micro Scale so that it is below the lanyard hole of the the pistol grip and the back edge is aligned with back edge of your LifeCard® pistol grip.
- Press the Micro Scale firmly against the pistol grip.
You use the Micro Scale immediately after mounting. The adhesive takes up to 72 hours to fully adhere.
Removing the Micro Scale
- To remove, push gently against the Micro Scale between the top edge at the larger round corner and the pistol grip.
- Work your way along the edge to the bottom end of the Micro Scale.
- Once removed be sure to rub against the pistol grip to remove any adhesive left behind.
Additional information
| Weight | .5 kg |
|---|---|
| Dimensions | 4 × 4 × 4 cm |
All accessory designs are copyright of LifecardSight. Any infringement will be meet with legal action.
