MD Mounts
$35.00
The MD Mounts are designed for mounting a micro red dot sight to your LifeCard® pistol. They are designed to be easily mounted and removed. The footprint is held onto the firearm by 3M adhesive.
Available in RMS, SMS, RMR, DOCTOR, and DELTAPOINT
Each MD Mount has brass threaded inserts and comes with multiple sets of mounting screws to mount your optic. 9mm (x3), 12 mm (X2), and 14mm (x2)
NOTE: The two recoil posts are in the front of the RMS MD Mount. If your micro dot does not have the two post holes in the front on the bottom use the SMS MD Mount. The SMS is universal fit for any RMS micro dot. There are no recoil posts on the SMS MD Mount. Align with the mounting screws.
The MD Mounts have a limited warranty for defects in the materials.
Attaching the MD Mount
- Make sure the pistol is unloaded
- Remove the adhesive cover from the bottom of the footprint.
- Place the footprint with the back bottom edge near the rear of the chamber end of barrel but not beyond the end.
- Press firmly so the adhesive is evenly seated.
- Allow 72 hours before mounting a micro red dot and before shooting the pistol for the adhesive to adhere properly.
- Mount your optic using a set of the supplied screws that fits the height needed for your optic. (Use only purple thread locker on mounting screws)
- Tighten mounting screws until they stop. (Do not over tighten)
Additional information
| Weight | .5 kg |
|---|---|
| Dimensions | 4 × 4 × 4 cm |
