Half Scale RT
$30.00
Designed to give you a better grip.
The Half Scale RT has a rubber textured panel that allows for a better purchase on the firearm. When firing it helps with keeping your grip more consistent each time you shoot.
It allows for the use of the lanyard hole in the grip.
The Half Scale RT is mounted to the left side of the pistol grip with 3M removable adhesive. See directions below.
Mounting the Half Scale RT
- Peel off the film from the adhesive on the back.
- Line up the back edge of the Half Scale with the back and the bottom edges with the back and bottom edges of the pistol grip.
- Press the Half Scale firmly against the pistol grip.
You can use the Half Scale immediately after mounting. The adhesive takes up to 72 hours to fully adhere.
Removing the Half Scale
- To remove, push gently against the Half Scale between the bottom edge at the larger round corner close to the logo.
- Work your way along the edge to the top end of the Half Scale.
- Once removed be sure to rub against the pistol grip to remove any adhesive left behind.
Additional information
| Weight | .5 kg |
|---|---|
| Dimensions | 4 × 4 × 4 cm |
All accessory designs are copyright of LifecardSight. Any infringement will be meet with legal action.
